Hy-Cap LIC (Lithium Ion Capacitor) single cell products are rated at 3.8v and suitable for applications requiring higher voltage and high energy density than standard EDLCs.
High reliability at 85°C temperature
Suitable for long-time standby power applications due to low self-discharge
High safety(No risk of heat explosion or ignition by chemical reaction)
Long life and high energy density
Physical adsorption / desorption reaction
Principles of EDLC
Activated carbon electrode
Extend product life
Principles of LIB
Carbon-based material electrode pre-doped with lithium ion
The Hy-Cap LIC 3.8V consists of a cylindrical lead type terminal.
Click on each product name in the table below to view the pictures of the product. Click the PDF marker to download the specification sheet.
|Temperature characteristics||Spec Sheet|
|VLCRS3R8206MG||-30 ~ +70
(Over +70 ~ +85)
|20±15%||Under 250||10||4000||Within initial spec.
※Charging voltage is
3.5V when above 70℃
● Reliability data
|Operating temperature range||-30 ~ + 85℃||-|
|Maximum available voltage||3.8V||Within the Operating Temperature Range
(3.5V when over 70~85℃)
|Minimum available voltage||2.2V||Within the Operating Temperature Range
(2.5V when over 70~85℃)
|Soldering||Capacitance: Within initial spec.
DCR: Within inital spec.
Appearance: No noticeable abnormality
Soldering iron temperature: 390±5℃
The soldering iron of the above conditions is applied twice to the lead wire (+pole, -pole) 1㎜ away from the cell main body.
|Floating charge characteristics-1||Capacitance: Over 80% of initial spec.
Internal resistance: Within 1.5 times of initial spec.
Appearance: No noticeable abnormality.
|Apply 3.8V to capacitor for 1000 hours at 70℃ and measure the floating charge characteristics after returning to normal temperature and humidity.|
|Floating charge characteristics-2||Apply 3.5V to capacitor for 1000 hours at 85℃ and measure the floating charge characteristics after returning to normal temperature and humidity.|
|Heat cycle characteristics||Leave the capacitor in below condition, and measure the characteristics after returning to normal temperature and humidity.
Temperature: 85±2℃, -40±2℃
Cycle Numbers: 100cycles
|Floating charge characteristics in high temperature and high humidity||Apply 3.8V 90%Rh to capacitor for 500 hours at 60℃ and measure the floating charge characteristics after returning to normal temperature and humidity.|
|Shock resistance||No exterior abnormality observed.
Initial spec. values retained.
|According to JIS C 60068-2-27
Half-sine wave A=294
|Vibration resistance||Apply a sine wave vibration of 1.5mm amplitude and freqency 10~55Hz, for 2hours per each direction (X,Y and Z), total 6 hours.|
|Part number||Tray||Package||Out box||Size(mm)|
Hy-Cap LIC products can be used in a growing number of applications. You can also zoom in the photo by hovering the cursor over the picture.